Home Smart Controller RGB Wi-Fi OP-WS03 Smart Controller RGB Wi-Fi OP-WS03 have main functions: DIY mode, timer, group, scene, music, reminder, etc. ; 16 million colors and a user-friendly interface for managing intension (RGB). You can set any timer to turn on and off the LED strip, and set different lighting mode signals. Works with Amazon Alexa, use AWS cloud to make online stability.... View
Home Smart Dimmer LED WiFi OP-WS01 Smart Dimmer LED WiFi OP-WS01 have main functions: DIY mode, timer, group, scene, music, reminder, etc. ; 1% ~ 100% dimming brightness. You can set any timer to turn on and off the LED strip, and set different lighting mode signals. Works with Amazon Alexa, use AWS cloud to make online stability. Supports local network management and long distance... View
Home Amplifier for RGB Controller FT-AM-01C LED amplifier FT-AM-01C can receive LED controllers's driving signal and amplify the signal to drive more LED products like LED strip. With this LED amplifier, user can easily expand the LED installations with synchronized color or dynamic modes. This amplifier has 3 channels and can be used on RGB Leds. View
Home LED dimmer with remote control FT-DM-01 FT-DM-01 touch LED dimmer adopts the advanced micro-control unit, it is used for controlling a variety of lamp whose source of light is LED such as spot light, flexible light strip, wall washer lamp, glass curtain wall light and so on. The controller is easy to install and use. User can adjust LED brightness by visual touch ring or touch keys with coarse... View
Home Controller RGB with remote control FT-CT-01 Controller RGB FT-CT-01 adopts the advanced micro-control unit, it is used for controlling a variety of lamp whose source of light is LED such as spot light, flexible light strip, wall washer lamp, glass curtain wall light and so on. The controller is easy to install and use. According to the different need of customers, besides variety static colors, it... View
Home Amplifier for LED Dimmer FT-AM-01D LED amplifier FT-AM-01D can receive LED controllers's driving signal and amplify the signal to drive more LED products like LED strip. With this LED amplifier, user can easily expand the LED installations with synchronized color or dynamic modes. This amplifier is for single color application, and all 3 'V-' terminals for both input and output are... View
Home Controller LED CCT (Multiwhite) with remote control FT-CC-01 Controller FT-CC-01 CCT (Multiwhite), 12V/24V, 20A Black (Touch), output corrent 20A, radio remote control. Remote control for touch buttons + touch ring for adjusting the color of the glow. The controller is designed for led strip type CCT (Meultiwhite), with the help of a touch ring it allows you to adjust the tint of the strip glow from white warm tho... View
Home Controller RGBW with remote control FT-CT-02 Controller RGBW FT-CT-02 adopts the advanced micro-control unit, it is used for controlling a variety of lamp whose source of light is LED such as spot light, flexible light strip, wall washer lamp, glass curtain wall light and so on. The controller is easy to install and use. According to the different need of customers, besides variety static colors, it... View
Home Controller RGBW with remote control 4 zone FT-CT-03 RGBW controller FT-CT-03 for 4 zones, you can use one remote control to control the light source for up to 4 rooms or up to 4 zones. This controller has an advanced micro-control unit, it is used to control various lamps whose light source is LED, such as spot light, flexible light strip, wall lamp, glass pendant wall lamp, etc. . The controller is easy... View
Home Controller RGB with remote control 3 zone FT-CT-04 RGB controller FT-CT-04 for 3 zones, you can use one remote control to control the light source for up to 3 rooms or up to 3 zones. This controller has an advanced micro-control unit, it is used to control various lamps whose light source is LED, such as spot light, flexible light strip, wall lamp, glass pendant wall lamp, etc. . The controller is easy to... View
Home Motion Sensor Switch (PIR) integrated in the aluminum profile with led strip FT-PR-01 Motion Sensor Switch (PIR) for LED strip, FT-PR-01 is designed for automatic lighting control. The sensor is made in the form of a printed circuit board without a housing, the overall dimensions of which allow it to be placed in an LED profile. The Motion Sensor Switch (PIR) FT-PR-01 is active both during the day and at night. After detecting movement in... View
Home Controller Led IC (Runner) Touch FT-CT-05 The FT-CT-05 LED IC Touch Controller is designed to control a new generation of smart strips with LED IC (Runner). An IC strip differs from a conventional strip in that each LED is controlled by a microprocessor. With this controller, you can set up to 20 dynamic modes of the strip, adjust the brightness and dynamic speed of the strip, you can also turn... View
Home Switch dimmable with touch sensor integrated into the aluminum profile with led strip FT-PR-02 Touch switch FT-PR-02 with dimmer for LED strip. Has manual control, output current 5A. Designed for installation in LED profile. This LED strip switch has the ability to turn the LED strip on and off with a light touch. Also, they can adjust the brightness of the LED strip from 10% to 100%. To do this, just keep your finger on the sensor. The miniature... View
Home Controller Led IC (Runner) with remote control FT-CT-06 The FT-CT-06 LED IC Controller is designed to control a new generation of smart strips with LED IC (Runner). An IC strip differs from a conventional strip in that each LED is controlled by a microprocessor. With this controller, you can set up to 20 dynamic modes of the strip, adjust the brightness and dynamic speed of the strip, you can also turn off the... View
Home Switch dimmable with infrared sensor integrated into the aluminum profile with LED strip FT-PR-03 Switch dimmable with infrared sensor FT-PR-03 is an open-frame board with an infrared sensor that can be activated with a wave of the hand. The sensitivity range of the IR sensor is up to 10 cm. The operating voltage is 12/24 volts. With the FT-PR-03 switch, you can control the LED illumination by moving your hand. With it, you can turn on and off the... View
Home RGB Touch controller FT-CT-07 FT-CT-07 RGB touch controller adopts the advanced micro-control unit, it is used for controlling a variety of lamp whose source of light is LED such as spot light, flexible light strip, wall washer lamp, glass curtain wall light and so on. The controller is easy to install and use. Wall mounted and equipped with touch control. User can adjust LED... View
Home Motion Sensor Switch (PIR) FT-PR-04 The FT-PR-04 motion sensor switch is presented in a compact white case, which makes it almost invisible in operation. Working voltage 12/24 volts. To connect the sensor, the kit includes Power jack 2pin - 5,5mm Father connectors. The switch with the FT-PR-04 motion sensor reacts to movement at a distance of up to 5 meters with a viewing angle of 120 °.... View
Home RGBW Touch controller FT-CT-08 FT-CT-08 RGBW touch controller adopts the advanced micro-control unit, it is used for controlling a variety of lamp whose source of light is LED such as spot light, flexible light strip, wall washer lamp, glass curtain wall light and so on. The controller is easy to install and use. Wall mounted and equipped with touch control. User can adjust LED... View
Home Built-in dimmable switch with touch sensor FT-PR-05 Built-in dimmable switch with a sensor touch FT-PR-05 for manual LED strip, output current 5A. Working voltage 12/24 volts. This touch button is designed to turn the LED backlight on and off, as well as adjust the brightness from 10% to 100%. A light touch with your finger allows you to turn it on or off, and a hold allows you to adjust the brightness.... View
Home Amplifier (Switch) for Led IC controller (Runner) for 8 zones FT-AM-02C Amplifier (Switch) for Led Controller IC (Runner) FT-AM-02C is used as a connector for connecting 8 LED strip ICs in parallel. On one side the LED controller IC is connected and on the other side up to 8 LED strip ICs can be connected. In addition, this amplifier can be connected to each other and thus double the number of connected strips. View
Home Led controller for stairs with double sensor FT-CT-09 The FT-CT-09 LED strip controller is designed to control LED strips on stairs. With this controller you can automatically turn on the step lighting using two sensors installed at the top and bottom of the stairs. Thanks to two sensors, the step lighting turns on automatically when you approach the stairs. With this controller each step is activated in... View
Home Led controller for stairs with double sensor for LED IC (runner) FT-CT-10 The FT-CT-10 LED Strip Controller IC (Runner) is designed to control LED strips on stairs, corridors and other rooms. With this controller you can automatically turn on the LED strip IC (Runner) using two sensors installed at different ends of the strip. Thanks to two sensors, the lighting turns on automatically when you approach and the strip lights up... View
Home LED dimmer with remote control FT-DM-02 FT-DM-02 LED dimmer adopts the advanced micro-control unit, it is used for controlling a variety of lamp whose source of light is LED such as spot light, flexible light strip, wall washer lamp, glass curtain wall light and so on. This controller allows you to dim the strip both using the remote control and using the controller unit.The controller is easy... View
Home LED dimmer Touch FT-DM-03 FT-DM-02 LED dimmer adopts the advanced micro-control unit, it is used for controlling a variety of lamp whose source of light is LED such as spot light, flexible light strip, wall washer lamp, glass curtain wall light and so on. The controller is easy to install and use. Wall mounted and equipped with touch control. User can adjust LED brightness by... View