Home Motion Sensor Switch (PIR) integrated in the aluminum profile with led strip FT-PR-01 Motion Sensor Switch (PIR) for LED strip, FT-PR-01 is designed for automatic lighting control. The sensor is made in the form of a printed circuit board without a housing, the overall dimensions of which allow it to be placed in an LED profile. The Motion Sensor Switch (PIR) FT-PR-01 is active both during the day and at night. After detecting movement in... View
Home Switch dimmable with touch sensor integrated into the aluminum profile with led strip FT-PR-02 Touch switch FT-PR-02 with dimmer for LED strip. Has manual control, output current 5A. Designed for installation in LED profile. This LED strip switch has the ability to turn the LED strip on and off with a light touch. Also, they can adjust the brightness of the LED strip from 10% to 100%. To do this, just keep your finger on the sensor. The miniature... View
Home Switch dimmable with infrared sensor integrated into the aluminum profile with LED strip FT-PR-03 Switch dimmable with infrared sensor FT-PR-03 is an open-frame board with an infrared sensor that can be activated with a wave of the hand. The sensitivity range of the IR sensor is up to 10 cm. The operating voltage is 12/24 volts. With the FT-PR-03 switch, you can control the LED illumination by moving your hand. With it, you can turn on and off the... View
Home Motion Sensor Switch (PIR) FT-PR-04 The FT-PR-04 motion sensor switch is presented in a compact white case, which makes it almost invisible in operation. Working voltage 12/24 volts. To connect the sensor, the kit includes Power jack 2pin - 5,5mm Father connectors. The switch with the FT-PR-04 motion sensor reacts to movement at a distance of up to 5 meters with a viewing angle of 120 °.... View
Home Built-in dimmable switch with touch sensor FT-PR-05 Built-in dimmable switch with a sensor touch FT-PR-05 for manual LED strip, output current 5A. Working voltage 12/24 volts. This touch button is designed to turn the LED backlight on and off, as well as adjust the brightness from 10% to 100%. A light touch with your finger allows you to turn it on or off, and a hold allows you to adjust the brightness.... View
